Roberts-radio RDK-2 Manuel d'utilisateur télécharger pdf (Page 30)

Alarm mode

Your radio has an alarm which can be set to wake you to radio (DAB, FM),

SD card playback or buzzer alarm. The alarm can be set to sound once,

daily, on weekdays or at weekends. The alarm can be set whether the

radio is on or in standby mode. In the event of a power interruption your

radio has a built in memory chip that will maintain your alarm settings for

when the power is restored.

Note: Alarm times are set using the 24 hour format. So for example,

2:30PM is entered as 14:30. If no buttons are pressed for 5 seconds, the

radio will exit the alarm setup.

Setting an alarm

1. Touch Timer/Set button for 2-3 seconds to enter the timer options.

The display will show "Set Clock".

Note that a short touch of the button will allow you to view the settings

but not to change them.

2. Repeatedly touch the Tuning Up/Down buttons until "Alarm timer"

shows on the display and then touch the Select button to enter the

alarm setting menu. The alarm status will show on the display.

3. Repeatedly touch the Tuning Up/Down buttons until "On" appears

on the display. Touch the Select button to conﬁ rm the setting. If you

want to turn the alarm off permanently touch the Tuning Up/Down

buttons until "Off" shows on the display and then touch the Select

button to conﬁ rm.

4. Repeatedly touch the Tuning Up/Down buttons to choose the desired

hour for the alarm and then touch the Select button to conﬁ rm the

hour setting.

2,3,4

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Pas de commentaire

Roberts-radio RDK-2 Manuel d'utilisateur Page 30