Roberts-radio RDK-2 Manuel d'utilisateur télécharger pdf (Page 9)

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Using the touch panel

Your radio has a stylish touch panel instead of conventional buttons. This

is designed so that it is easy to clean using a slightly damp cloth. Do not

use solvents.

Be sure to dry of any moisture from the touch panel after cleaning, since this

may otherwise affect the reliability of the touch panel sensor system.

To operate the buttons simply touch the button area with the tip of a ﬁ nger

for about half a second. Some operations such as storing radio presets,

require a longer operation of the button. In this case simply keep your

ﬁ nger held on the button area for 2-3 seconds until the display on the

radio shows that the command has been accepted.

You may ﬁ nd that at ﬁ rst, the radio does not always detect that you have

touched a button. If so, try touching with a little more pressure, a little

higher or lower, or for slightly longer. You will soon ﬁ nd the optimum touch

needed to control your radio.

Using an alternative aerial

Your radio is supplied with a simple wire aerial. This will be satisfactory in

the majority of installations. However, if reception is poor in your kitchen,

you may wish to consider connecting the radio to an alternative aerial.

The supplied aerial is secured by a small plastic cover. Use a cross-head

screw driver to remove this cover. The aerial may then be removed by

pulling with a twisting action.

Once the aerial has been removed, a standard F-type socket is available

to which an alternative aerial may be connected.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Pas de commentaire

Roberts-radio RDK-2 Manuel d'utilisateur Page 9