Roberts-radio RDK-2 Manuel d'utilisateur télécharger pdf (Page 39)

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Switch on your radio.

2. Touch in the info button for 2-3 seconds until "Station order" appears

on the display.

3. Touch the Tuning Up/Down buttons to step through the options until

the display shows "Factory reset".

4. Touch the Select button and the display will show "Press SELECT

to conﬁ rm reset . . .".

5. Touch the Select button once more to conﬁ rm. A full reset of the radio

will be performed and all presets, station lists and the alarm setting

will be erased. After the reset is completed, a quick scan of UK DAB

band III frequencies will be carried out.

In case of malfunction due to electrostatic discharge, reset the product

(reconnection of power source may be required) to resume normal

operation.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

4,5

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Roberts-radio RDK-2 Manuel d'utilisateur Page 39